Humble Spray Foam · Harris County · IECC Zone 2A
Humble Spray Foam Insulation | Weeks Spray Foam
Weeks Spray Foam installs open-cell and closed-cell spray foam insulation for Humble homeowners, contractors, and metal building owners across Harris County. Operating out of Shepherd, TX, our crews route down US-59/I-69 to serve Humble and the surrounding Lake Houston area — licensed, insured, and working in this hot-humid East Texas climate since day one.
Get A Free Estimate
Humble Spray Foam Services
Weeks Spray Foam provides residential and commercial spray foam insulation throughout Humble, TX and Harris County. Call (936) 433-7046 to schedule a site assessment — we review attic, crawl space, walls, and any metal structures before writing a scope.
Metal building spray foam insulation
Barndominium spray foam insulation
Residential attic spray foam
Commercial building insulation
Crawl space spray foam insulation
Garage & shop insulation
Get a Humble spray foam estimate from Weeks
Why Humble's climate demands more than fiberglass
Humble sits in IECC Climate Zone 2A — hot and humid — the same demanding classification as the rest of Southeast Texas. The problem isn’t heat alone. It’s the combination of sustained heat and moisture vapor pressure that creates year-round stress on any building envelope. Fiberglass batts address conductive heat transfer but do nothing to stop air movement or moisture infiltration — the two primary failure modes in Zone 2A construction.
- IECC climate zone
- 2A — Hot/Humid
- Annual cooling season
- 8–9 months
- Avg summer dew point
- 70°F+ (May–Sept)
- Uninsulated attic peak temp
- Up to 140°F
- Attic temp spike vs ambient
- Up to 25% above outdoor
- Primary failure mode
- Moisture infiltration + mold
Spray foam addresses all three insulation failure modes simultaneously: thermal resistance, air infiltration, and vapor drive. Fiberglass addresses only the first. Humble homes with fiberglass in an unsealed attic lose conditioned air continuously through gaps, regardless of the batt R-value rating.
Open-cell vs. closed-cell: Humble application guide
- Open-cell R-value
- R-3.5 to R-3.8 / inch
- Closed-cell R-value
- R-6 to R-7 / inch
- Open-cell vapor permeance
- Permeable — not a vapor barrier
- Closed-cell vapor class
- Class II vapor retarder
- Closed-cell structural benefit
- Adds wall and roof deck rigidity
- Best open-cell use in Humble
- Interior walls — sound, no vapor concern
Closed-cell is the correct product at every point where insulation crosses the building envelope in Humble — attic roof deck, exterior walls, crawl spaces, and metal buildings. Open-cell at the envelope in Zone 2A can trap moisture inside the assembly and create the exact mold conditions you were trying to prevent.
Humble spray foam cost and payback
Weeks Spray Foam is upfront about pricing. Humble spray foam costs more than fiberglass — and the payback is strong given the length of the cooling season and the cost of moisture damage prevention.
- Open-cell installed
- $0.44–$0.65 / board ft
- Closed-cell installed
- $1.00–$1.50 / board ft
- Typical Humble attic (2,000 sq ft)
- $2,500–$5,500
- Metal building projects
- Scope dependent — call (936) 433-7046
- Lifetime HVAC energy reduction
- Up to 50%
- Mold remediation cost avoided
- $3,000–$15,000 per event
Want more detail? → Is spray foam worth it in Texas?
Retrofit spray foam for existing Humble homes
Humble sits in one of the flood-prone Lake Houston-area zones, so a large share of Weeks’ work here is post-flood remediation and retrofit on existing homes rather than new construction.
-
Attic conversion:
Existing insulation removed. Closed-cell sprayed to roof deck. HVAC now operates at ~80°F instead of 140°F. -
Crawl space / pier-and-beam:
Closed-cell to subfloor underside. High-impact retrofit for older Harris County homes. -
Walls during remodel:
Exterior walls treated before drywall re-close. Best window for full envelope treatment in an existing Humble home.
-
Metal buildings:
Retrofit closed-cell for Harris County shops, barns, and storage structures with condensation or heat problems. -
Post-flood homes:
Humble, Kingwood, and Lake Houston-area homes affected by past flood events. Weeks assesses whether existing insulation needs to be removed and replaced as part of remediation.
Humidity, moisture, and mold prevention in Humble, TX
- HVAC dehumidification load
- Significantly reduced
- Indoor allergen infiltration
- Reduced with air sealing
- Mold risk in wall assemblies
- Substantially lowered
- Musty odor (crawl space)
- Typically resolved
- Vapor retarder class
- Class II (closed-cell)
- Open-cell at envelope
- Not recommended in Zone 2A
Persistent musty smell? High humidity inside despite running AC? These are crawl space and attic moisture signals. Weeks assesses both before recommending scope. → Call us for a free estimate today
Attic insulation: Conditioned vs. vented
Humble homeowners call Weeks asking about heat. The conversation almost always turns to moisture — because in Zone 2A, moisture infiltration is often the more damaging and expensive long-term problem.
- Vented attic peak temp (Humble)
- Up to 140°F
- Conditioned attic temp
- Tracks living space ~80°F
- HVAC in vented attic
- Operates at 140°F — high stress
- HVAC in conditioned attic
- Operates at ~80°F — normal range
- Duct losses (vented)
- Significant — ducts cross envelope
- Duct losses (conditioned)
- Minimal — ducts inside envelope
HVAC sizing → important for Humble retrofits | After a full Humble spray foam retrofit, an existing HVAC system may be oversized for the reduced thermal load. Oversized systems short-cycle and fail to dehumidify — critical in this climate. Weeks raises this proactively on whole-envelope projects. Tightly sealed homes also need mechanical fresh air — an ERV or controlled intake should be evaluated as part of scope.
→ Call us for a free estimate today
Planning Your Insulation Project
Weeks provides written re-entry instructions before every Humble spray foam project. No same-day pricing pressure. Every estimate starts with a site walk. Call (936) 433-7046 to schedule.
- Full attic conversion (2,000 sq ft)
- 1 day typical
- Whole-envelope project
- 2–3 days
- Metal building
- 1–3 days — scope dependent
- Occupant re-entry
- 24 hours post-application
- Pet re-entry
- 24 hours minimum
- Re-entry documentation
- Written — before work begins
How to vet a Humble spray foam contractor
Texas’s post-disaster markets have brought in out-of-state crews and short-term operations across the region. These questions separate established local contractors from transient ones.
Product identification
Name the product and manufacturer. Technical data sheet available on request.
Thickness in writing
Application depth and verification method in the written scope — not verbal.
Texas licensing and insurance
Certificates — not verbal confirmation.
Crew employment status
Employees vs. subcontractors (Quality Control varies significantly).
Verifiable local references
Homeowners in comparable Harris County housing who will take a call.
HVAC and ventilation discussion
A contractor who quotes without asking about your mechanical system hasn't thought about the full picture.
Humble market red flags → Bids 40%+ below market signal product quality or crew experience gaps. No HVAC discussion before quoting is a building science gap. Same-day decision pressure is a documented pattern from Texas’s post-disaster contractor surges. No written re-entry documentation is a disqualifying condition.
Recent open-cell spray foam projects in Humble & Harris County
Real installs across the region — pulled directly from our project archive by service type. Every job linked to the full project page with photos and details.
Sorry, we couldn't find any posts. Please try a different search.
Humble neighborhoods and service zones
Weeks Spray Foam is based at 175 Country Wood Dr, Shepherd, TX 77371 — about 38 miles from Humble via US-59/I-69. Humble is a major commercial and retail hub for Northeast Harris County, sitting right next to George Bush Intercontinental Airport and the Lake Houston area. Crews route through Humble regularly from our Shepherd, TX base.
| Zone | Neighborhoods | Primary project type |
|---|---|---|
| Humble / IAH Area | Downtown Humble, near George Bush Intercontinental Airport | Commercial, retail, and warehouse buildings |
| Kingwood | Kingwood, Forest Cove | Established residential, post-flood attic and envelope retrofits |
| Atascocita | Atascocita, Lake Houston shoreline | Newer subdivisions, lakefront humidity exposure |
| Outlying Harris County | Rural and unincorporated Northeast Harris County | Metal buildings, shops, and agricultural properties |
Humble Spray Foam Insulation FAQs
How much does spray foam insulation cost in Humble, TX?
The cost of spray foam insulation in the Humble area depends on your project's total square footage, the required thickness (R-value), and whether you need open-cell or closed-cell foam. Generally, open-cell foam ranges from $1.50 to $3.00 per square foot, while heavy-duty closed-cell foam ranges from $2.50 to $4.50+ per square foot. We provide completely free, accurate on-site estimates for homes and commercial shops across Harris County.
Is open-cell or closed-cell spray foam better for the Humble climate?
Closed-cell spray foam is highly recommended for the Humble and Lake Houston-area climate because it acts as a built-in moisture vapor barrier. The humidity near the lake and Gulf Coast can penetrate standard insulation, but closed-cell foam rejects water and completely seals metal buildings, barndominiums, and crawl spaces. Open-cell foam is an excellent, cost-effective option for interior walls and rooflines in residential homes where soundproofing and high thermal performance are needed.
How does spray foam insulation lower summer cooling bills in Humble?
East Texas summers put immense strain on air conditioning systems. Traditional fiberglass allows hot, humid air to leak into your home or commercial shop. Spray foam expands to fill every crack, crevice, and structural seam, creating an airtight seal. This stops radiant heat transfer from your roofline, allowing your HVAC system to maintain comfortable indoor temperatures while reducing monthly energy consumption by up to 40-50%.
Do you travel to all areas of Humble and Harris County?
Yes! Our main shop is based out of Shepherd, TX — about 38 miles from Humble — so our specialized spray foam rigs deploy regularly to project sites throughout Northeast Harris County. We serve residential and commercial clients from downtown Humble out to Kingwood, Atascocita, and the surrounding areas.